HLS-36USB
 |
HLS (MKY36) mounted USB unit |
 |
|
HLS-36USB is an HLS master device which mounts MKY36, a master IC of HLS family, connected to PC via MicroUSB interface. |
||
Main specifications
General specifications
| Item | Specifications | ||||
|---|---|---|---|---|---|
| Power supply method | MicroUSB bus power | ||||
| Allowable power supply voltage fluctuation range |
4.75 V to 5.25 V | ||||
| Consumption current | 400 mA or lower | ||||
| Operating frequency | 48 MHz (MKY36) | ||||
| Maximum concurrent use | Four units (Up to 4 units can be connected to a PC.) | ||||
| Operating temperature | 0℃ to 40℃ | ||||
| Storage temperature | 0℃ to 80℃ | ||||
| Operating humidity | 0% to 90% (With no condensation) | ||||
| Atmospheric conditions | With no corrosive gases | ||||
| Size | 66.5 mm (W) × 28 mm (H) × 92 mm (D) Not including rubber feet |
||||
| Weight | 100 g (max) | ||||
HLS communication specifications
| Item | Specifications | ||||
|---|---|---|---|---|---|
| Communication method | Full-duplex and half-duplex can be selected by switch and program. | ||||
| Communication configuration | Multi-drop configuration | ||||
| Communication cable | Shielded twisted-pair cable (CAT-5 or greater straight-through cable can be used.) |
||||
| Interface | RJ45 (2 pcs), RS-485 level, differential type, pulse-transformer isolation |
||||
| Communication rate | 12/6/3 Mbps (Rates can be selected by software program.) |
||||
| Termination | Enable/Disable can be selected by switching. Termination enabled: 100 Ω |
||||
| LED indicator | Communication is active: MON LED is lit green. Communication is stopped: MON LED is lit off. |
||||
Interfaces and PC system requirements
| Item | Specifications | ||||
|---|---|---|---|---|---|
| USB bus specification | USB 2.0/1.1 | ||||
| USB interface | MicroUSB | ||||
| Supported OS | Windows 8.1 (64 bit/32 bit) Windows 8 (64 bit/32 bit) Windows 7 (64 bit/32 bit) |
||||
| Accessory | USB cable | ||||
| Provided software | Windows driver, Library, HLSeditor | ||||