![]() |
CUnet (MKY43) mounted USB unit |
![]() |
CU-43USB is a CUnet master device which mounts MKY43, a master IC of CUnet family, connected to PC via MicroUSB interface. |
Item | Specifications |
---|---|
Power supply method | MicroUSB bus power |
Allowable power supply voltage fluctuation range |
4.75 V to 5.25 V |
Consumption current | 400 mA or lower |
Operating frequency | 48 MHz (MKY43) |
Maximum concurrent use | 4 units (Up to 4 units can be connected to a PC.) |
Operating temperature | 0℃ to 40℃ |
Storage temperature | 0℃ to 80℃ |
Operating humidity | 0% to 90% (With no condensation) |
Atmospheric conditions | With no corrosive gases |
Size | 66.5 mm (W) × 28 mm (H) × 92 mm (D) Not including rubber feet |
Weight | 100 g (max) |
Item | Specifications |
---|---|
Communication method | Half-duplex |
Communication configuration | Multi-drop configuration |
Communication cable | Shielded twisted-pair cable (CAT-5 or greater straight-through cable can be used.) |
Interface | RJ45 (2 pcs), RS-485 level, differential type, pulse-transformer isolation |
Communication rate | 12/6/3 Mbps (Rates can be selected by software program.) |
Termination | Enable/Disable can be selected by switching. Termination enabled: 100 Ω |
LED indicator | Communication is active: MON LED is lit green. Communication is stopped: MON LED is lit off. |
Item | Specifications |
---|---|
USB bus specification | USB 2.0/1.1 |
USB interface | MicroUSB |
Supported OS | Windows 8.1 (64 bit/32 bit) Windows 8 (64 bit/32 bit) Windows 7 (64 bit/32 bit) |
Accessory | USB cable |
Provided software | Windows driver, Library, CUeditor |