1. HOME
  2. > IC products
  3. > CUnet
  4. > MKY44-AD16A

MKY44-AD16A

mky44_AD16A

CUnet slave IC, two 16-bit AD channels + DIO

The MKY44-AD16A is a CUnet station (hereafter "slave") IC with analog input function.
With an MKY44-AD16A, analog input and DIO control can be achieved on one chip without using the CPU, by connecting an AD7682 (Analog Devices, Inc. AD converter) by SPI.

AD capture and DO output speeds depend on the cycle time of the CUnet network.
For analog input, the data acquisition timing can be selected from 5 modes.
Analog input data is automatically input to the MKY44-AD16A's self-owned memory block.
The input data is automatically copied to all CUnet ICs through CUnet communication (memory sharing), so the user CPU can acquire analog data easily just by reading the memory blocks corresponding to each slave IC.
Existing users of CUnet can get analog input just by adding this product to their networks.
New users have the opportunity to reduce A/D wiring that used to use parallel connections and to achieve easy, networked analog input.

MKY44-AD16A specifications

ADC AD7682 external. SPI connection.
Number of channels 2-channel multiplexer
Acquisition mode Cyclic mode
Software trigger mode
Hardware trigger mode
Moving average mode (peak shaving available)
Period average mode (peak shaving available)
DIO DI 8 bits / DO 8 bits
ST44SW Required
Communication method CUnet communication
Transfer rate 3/6/12 Mbps (Half-duplex)
Package TQFP 64-pin
Package dimension 12×12×1.2 mm (0.5 mm pitch)
Operating ambient
temperature
-40 to +85°C
Supply voltage 3.3V
External input operating
frequency
4 MHz (The oscillator is supported.)

ADC specifications

Manufacturer Analog Devices, Inc.
Model AD7682
Input Unipolar, Virtual bipolar
Differential (ground sense)
single end
A/D conversion resolution 16 bits
Number of channels 2-channel multiplexer

Download (documents)