1. HOME
  2. 〉 Board products
  3. 〉 Discontinued products
  4. 〉 CUB-43PCI1

CUB-43PCI1 (Discontinued Products)

■ Discontinued: December 28, 2022

MKY43 mounted PCI board

CUB-43PCI1 is a PCI expansion bus supported CUnet communication board which mounts MKY43, a CUnet family IC.
It provides easy operation of MKY43 with library for Windows available in our "Downloads" page and CUeditor.
8-pin modular connector is equipped for CUnet communication line and the operation can be evaluated with commercial CAT-5 or greater straight-through cable for
100BASE-TX.
The board format is low-profile PCI.
Both of standard and low-profile size brackets are attached with the product.

Main specifications

Item Specifications
CUnet device MKY43 × 1 pc
CUnet Communication method Half-duplex
CUnet Communication rate 12/6/3 Mbps
(Rate can be set by MKY43 register.)
CUnet communication connector RJ45 type (8-pin modular) × 2 pcs
Termination ON/OFF can be switched. (Resistance: 100 Ω fixed)
LED MON
MCARE
LCARE		 (Green)
(Red)
(Yellow)		 MKY43
MKY43
MKY43		 MON
MCARE
LCARE		  
Supported bus PCI Ver2.2 supported, 32-bit/33 MHz expansion bus, 5.0 V/3.3 V supported.
Owned resource 16 KB contiguous memory area (PnP supported)
Maximum concurrent use 4 units
Supported OS Windows 10 (64 bit/32 bit)
Windows 8.1 (64 bit/32 bit)
Windows 8 (64 bit/32 bit)
Windows 7 (64 bit/32 bit)
Power supply +5.0 V DC
Consumption current 500 mA or lower
Operating conditions
 Temperature: 0℃ to 50℃
Humidity: 20% to 90% (With no condensation)
Storage conditions
 Temperature: 0℃ to 80℃
Humidity: 0% to 90% (With no condensation)
Size 119.9 mm (W) × 64.4 mm (H)
*Not including bracket (Low-profile supported)
Weight 60 g (max)
Accessory Low-profile bracket
Provided software Windows driver, Library, CUeditor

Downloads (Documents and software)